OFFICIALRULEBOOK
The complete guide to competing in the Buffed Out Drift Series. Every driver is expected to know and follow these rules.
Before you race.
Attend Driver Meetings
You must attend all driver meetings to be in a competition or event at BODS. If you do not attend, you do not run.
Pass Inspections
Your car must pass the spec-check before an event. You can change spec before driver meeting to enter the event.
Same Car Policy
The car you entered qualifications in must be the car you use in the competition. You cannot change.
On-Spec Car Policy
Your car must be on spec at all times during the competition, you cannot edit or change your tune during an event.
Build it right.
Body
All panels attached. Teams run team livery. Solo drivers any paint/livery*
Suspension
Disqualification for unrealistic suspension.
Follow the TYRE SETUP below to spec your car according to its weight. You can run any engine with any car at any horsepower level.
| Engine | Max HP | Perfect Weight |
|---|---|---|
| SR20 | 643 HP | 900 kg |
| 13B | 717 HP | 1004 kg |
| 2JZ | 850 HP | 1190 kg |
| RB26 | 857 HP | 1200 kg |
| LS3 | 924 HP | 1294 kg |
| VQ38 | 1277 HP | 1500 kg |
| Weight Range (kg) | Tire Width F (mm) | Set Tire Width R (mm) | Set Profile (%) | Pressure F (bar) | Pressure R (bar) | Tyre |
|---|---|---|---|---|---|---|
| 900 – 1199 kg | Up to 245 mm | Up to 265 mm | 35% | ANY | 1.2 bar | SEMI SLICK |
| 1200 – 1299 kg | Up to 245 mm | Up to 265 mm | 35% | ANY | 0.8 bar | SEMI SLICK |
| 1300 – 1500 kg | Up to 245 mm | Up to 265 mm | 35% | ANY | 0.7 bar | SEMI SLICK |
100 points. Three criteria.
A total of 100 points can be obtained by perfecting your runs.
Line
Hit all zones: Entry, Inside Clips, Outside Zones, Transitions.
Angle
Aggressive, consistent angle throughout the line and corners.
Style
Smooth transitions, no corrections, proximity to lead driver.